Top 10 Safety Tips For Using a Log Splitter

When it comes to using a log splitter there are many things to be excited about. These helpful products often put an end to your toiling over piles and piles of logs which must be cut by hand. Instead, a wood splitter had the ability to effortlessly and quickly put an end to your work by chopping logs at an astounding rate. Just as with any other major appliance or machine however, there are many safety measures which should be observed in order to ensure that no one gets hurt. Below you will find the top ten safety tips that should be utilized when a log splitter is in operation.

1. Protect the Children
Children should never operate or even be near a log splitter when it is being operated. Children do not understand the respect that should be shown to electrical machines, and there is a great risk of injury should you let them near the machine when it is in use.

Snow Throwers

2. Wear Protective Items
Whenever you are operating a wood splitter, protective items should be worn at all times. There is always the risk of flying debris or for the logs to fall once they have been split. Because of this, safety glasses and steel toe boots should be worn at all times.

Top 10 Safety Tips For Using a Log Splitter

3. Read the Instructions
The majority of log splitter injuries are caused by the fact that the user failed to read the instructions before operating the machine. If a splitter is used in an incorrect way, it can cause injury or break.

4. Clear the Area
Using a wood cutting machine in a crowded or bunched up area is not recommended. There should be a clear perimeter of several feet around the entire machine. If other people or items are too close to the product, they risk getting harmed by falling debris or may even cause the machine to overheat.

5. Be Careful with Adjustments
If you need to make an adjustment to the wood splitter, it should only be done when the machine is turned completely off. Adjusting a product when it is still running could cause something to go wrong and someone could be hurt.

6. Don't Work at Night
Although wood cutters are extremely automated and may seem simple to operate, they should never be used at night or in the dark. There is a lot of chopping power behind these machines, and one slip up in the dark could cost you a hand or worse.

7. Do Not Operate Under the Influence
It is a given that equipment should not be operated when you have been drinking or doing drugs, but some do not understand that even a strong decongestant can cause you to become disoriented. Operating the wood splitter under the influence of any medication can be dangerous.

8. Make Sure the Area is Dry
Placing a wood splitter on a wet surface can not only cause it to be unstable and thus cause injury; it can also cause a fire or electrocute you. Since most of these machine have some sort of electric component, getting them wet can cause them to short circuit.

9. Don't Cut Anything but Wood
Even if you have something else that need cut up, you should only place regular wood logs into the splitter. Anything else could not only cause the machine to break, it could harm you as well.

10. Always Use the Guards
The guards are available on a log splitter to ensure your maximum safety while the machine is in use. These should always be used, and can improve the safety and performance of the machine.

If you follow the top ten safety tips above while operating your log splitter, you will be safe from harm and allow your machine a longer life span.

Top 10 Safety Tips For Using a Log Splitter

Recommend : Toro 1800 Snow Thrower Discount Snow Throwers